This Decal Measures 10 inches tall and 10 inches wide
Over 24 colors to choose from, FREE Custom Colors! That's right, you may choose any colors you want for this wall decal.
Please send in your color request with your order. For reference, please use our color chart that is attached.
If no color is chosen we will print and ship your decal in the color/colors as seen in the sample from which you ordered from.
However, colors may vary a little depending on your computer monitors settings and other factors.
This very cool vinyl wall design perfect for any room in your house! . Highest quality vinyl for that painted on look.
Easy to apply and comes with simple application instructions.
Some decals come in separate pieces/ parts, multiple colored decals may have alignment markers for easy application
Decals can be applied to any clean, smooth and flat surface. Put them on your walls, doors, windows - anywhere you want!
All our decals are computer die-cut,so there are no backgrounds included
Decals are easily removed however they are not repositionable or reusable. Decals peel off of walls easily,
typically without damaging the paint. However,
different paint finishes or walls condition could require touch-ups after decal is removed.
We have a TOTAL SATISFACTION guarantee. If, for any reason, you are not 100% satisfied with your purchase,
you can return any unused decals to us within 7 days of purchase for a full refund of the purchase price (less shipping).
Enjoy your new vinyl wall decals!
Thank you for choosing Design With Vinyl !
BEFORE YOU GET STARTED!
We want you to be happy with your Design With Vinyl Quote from the moment you put it on, so please follow these instructions carefully. You are about to put two different adhesive sheets onto your wall to install your graphic. Be sure that your paint has proper adhesion and will resist peeling away from the surface of your wall as you remove these two layers. You can test this by putting painter’s tape on the wall where you intend to apply the graphic and then removing it. On freshly painted walls, we recommend you wait 30 days before applying your graphic.
Your wall graphic comes in 3 layers:
The top layer is called transfer tape and was applied to the face of the graphic in our facility. This layer will help hold the graphic away from the wall until it is ready to be applied. The middle layer is the vinyl graphic. The bottom layer is the backing paper that protects the adhesive prior to application.
INCLUDED IN YOUR SHIPMENT:
- Ready-to-install wall graphic decal (quote)
- Installation instructions
- Additional Optional tools needed for installation:
- Blue painter’s tape
- Measuring tape
- Credit card or Flat plastic applicator (used to apply pressure on decal to wall)
- Ruler/straight edge
Step 1. Preparing the graphic
Remove your graphic from the box and lay it face up (so that the lettering is readable in this position) on a clean, dry, flat surface. Using the a application tool, rub the graphic as illustrated in the figure at right, working from the middle to the outside edge. This will remove any wrinkles and ensure that the graphic is securely attached to the transfer tape.
Step 2. Preparing the wall surface
Prepare your wall for installation ensuring that it is free of dirt, wax, oils and moisture. Make sure walls are completely dry before applying your graphic.
Step 3. Placing the graphic
Your eye will judge you’re graphic as being level by comparing it to the closest parallel line. This could be the top of a door jam or tabletop or perhaps the line where the wall meets the ceiling. Therefore, you should measure each end of the graphic to that parallel line so that it will be level to the eye. Center the graphic horizontally by making sure that each end is an equal distance from the ends of the space where it is to be placed. Then re-check to make sure the you’re graphic is still parallel to the closest parallel line mentioned above. See the figure at right. It illustrates putting a small piece of tape at each end of the graphic so that each is held in place as you adjust the other end.
Step 4. Hinging the graphic
Once the graphic is level, run a continuous line of painter’s tape across the top of the graphic to secure it to the wall. This tape forms a ‘hinge’ that secures your graphic in place while allowing you to lift it away from the wall in order to remove the backing paper.
Step 5. Removing the backing paper
Lift the graphic up so that the backside of the backing paper is facing outward. Hold the graphic in this position, and carefully remove the backing paper leaving only the graphic and the transfer tape. On larger graphics it will be made easier by only lifting the backing paper half way and folding it in the middle. This helps to hold the graphic uniformly away from the wall as the top part is laid to the wall. Then the balance of the backing paper can be removed a little at a time as the balance of the graphic is applied.
Step 6. Applying the graphic
Hinge the graphic back down, holding it away from the wall so as not to allow contact with the wall. Using a credit card or a plastic application tool, press the lettering on to the wall, smoothing the surface from top to bottom. See the figure at right. Use a application tool to smooth the entire surface – again working from the middle to the outside edges.
Step 7. Removing the transfer tape
To reveal the finished graphic, work slowly from one of the corners and carefully peel back the transfer tape at an acute angle. Do not pull the transfer tape straight out, as this could pull the lettering off at the same time.
Step 8. Enjoy your new wall art!